You can print this pirate paper doll and play it after cutting it out and folding it with wire and glue.
Follow these steps
rEQUIRED:
Printer, A4 sheet of paper (preferably cardboard), scissors, glue and wire.
1) Place a sheet of A4 cardstock on the printer. Turn on the printer and click on the picture. The drawing will go to print immediately.
2) Fold the sheet following the dotted line and cut out the pirate's silhouette (with the other you will make the sword), being careful that the front and the back match perfectly (you can check it against the light on the window glass)
3) Cut out the character, but do not cut the part of the fold yet, along the left arm.
5) Open the cut out template
6) Take 3 pieces of wire:
with a single piece shape the arms, with the other two shape the two legs including the bust and head
7) Glue on both sides and place the wire
8) Close according to the dotted line of the fold, making sure that the wire does not come out of the shape (keep it as much as possible inside) and press it with your fingers so that the glue adheres well to the paper and the wire.
9) Let it dry for a few minutes, under a pile of books that keep it pressed.
10) Now you can also cut out the piece of the fold along the arm.
11) Cut out the sword, insert a piece of wire and glue it.
12) You just have to play and ... Good fun!!!
The pirate drawing was made by Gianluigi Piludu. It is forbidden to post these designs on other websites. All rights reserved
www.cartonionline.com
is not responsible for the contents, shipments and services offered by the shops listed here. Cartoni online is not a commercial site, but merely suggests articles and services of other websites with external links.